Mobile chip glossary: eMMC, UFS, LPDDR, BGA, PoP and more
Words you hear in the scrap board and repair trade, each explained in one or two plain sentences.
Storage and memory
- NAND flash: the memory that keeps data when the power is off. Phone storage is built from it.
- Controller: the small processor inside a storage chip that manages the flash.
- eMMC: an older storage chip standard: flash and controller in one soldered package.
- UFS: a newer, faster storage standard. Not interchangeable with eMMC.
- MCP: multi-chip package, more than one chip under one cover.
- eMCP: eMMC storage and RAM in one package.
- uMCP: UFS storage and RAM in one package.
- RAM / LPDDR: working memory. LPDDR (low-power DDR) is the type used in phones, for example LPDDR4X or LPDDR5.
- GB and Gb: GB is gigabyte, Gb is gigabit. 8 Gb = 1 GB. Storage is sold in GB; RAM data sheets often use Gb.
- TB: terabyte. On the capacity ladder, 1 TB is the step after 512 GB.
Chip markings
- Part number: the full model code of a chip, for example KLMBG2JETD-B041.
- Marking: the text printed (usually laser-etched) on top of the chip. It may be the full part number or a short code.
- FBGA code: a short marking code used by Micron (for example JZ103) instead of the full part number. It needs a lookup.
- Prefix: the first letters of the code. They tell the maker and the chip type.
- Date code / lot code: lines that say when and in which batch the chip was made. They do not give the GB.
- Re-marked chip: a chip whose original marking was removed and replaced, sometimes to fake a bigger GB.
Board and repair
- IC: integrated circuit. In the trade, any chip.
- SoC / CPU: the main processor of the phone, usually the biggest chip.
- PMIC: power management IC, the chip that supplies power to the rest of the board.
- BGA: ball grid array. The chip is soldered by tiny balls under it, not by legs.
- PoP: package on package. RAM stacked on top of the processor.
- Underfill: glue under a BGA chip that holds it firmly. It has to be removed before the chip can be taken off.
- Reballing: putting fresh solder balls on a BGA chip, usually with a stencil, so it can be soldered again.
- ISP: in-system programming. Reading or writing a storage chip through test points on the board, without removing it.
- Dead board: a board that does not power on. Its storage chip can still have value.
Learn more
- eMMC, eMCP, UFS and uMCP: the difference
- How to find the GB from a chip code
- RAM chip or storage chip?
Check a chip in one scan
Know the words, now read the chips. ChipGB Scanner shows the GB, company and type in one scan.
Download for AndroidQuestions
What does BGA mean on a phone chip?
Ball grid array. The chip is soldered to the board by a grid of small solder balls underneath it.
What is the difference between eMMC and NAND?
NAND is the raw flash memory. An eMMC chip is NAND flash plus a controller in one package.
What is an FBGA code?
A short code that Micron prints on a chip instead of the full part number. You need Micron's decoder or a database to read it.
This guide is general. Numbering rules differ by family, and some codes are exceptions. Confirm the GB with a verified source before you pay.