Buying mobile scrap boards: a 7-step checklist before you pay
In the scrap board trade, a lot is only worth what its storage chips are worth. Most losses come from one of three mistakes: reading the wrong chip, reading the right chip wrongly, or missing damage. Run these seven checks on every lot before you pay.
1. Find the storage chip, not the processor or RAM
A phone board has several large chips. The storage chip (eMMC, eMCP, UFS or uMCP) is the one whose code starts with a storage prefix such as KLM, KLU, KM, H26, H28, HN8, H9TQ, H9HQ, MTFC or THG. The processor is usually the biggest chip and is often under a metal shield. Power chips (PMIC) carry codes such as PM... on Qualcomm boards and MT63... on MediaTek boards. If you are not sure which is which, read RAM chip or storage chip?
2. Read the code correctly
- Use daylight or a white LED, and a magnifier if you can.
- Tilt the board until the marking stops shining. Laser markings are easier to read at an angle.
- Watch for look-alikes: 0 and O, 1 and I, 8 and B, 5 and S, 2 and Z.
- Read the main line only. The 2D square code, the lot code and the date code do not give the GB.
3. Get the GB and the type together
Price depends on both. A 64 GB UFS chip and a 64 GB eMMC chip are not the same item. Use the maker's rule where one exists (see how to find the GB from a chip code) or a database lookup for codes that hide the capacity, such as Micron's five-character codes.
4. Look for damage
- Burn or heat marks around the chip, or a bubbled board.
- Green or white corrosion, a sign of water damage.
- A chip that sits crooked, or with flux and fresh solder around it, may have been removed and put back.
- Cracks in the board near the chip, and missing small parts around it.
5. Watch for re-marked chips
A chip whose top looks sanded, too shiny, or blurred, or whose text is a different font or colour from the same model on other boards, may have been re-marked to show a bigger GB. When something looks off, compare it with a known good board of the same model.
6. Sort the lot
Group boards by type first (eMMC, eMCP, UFS, uMCP), then by GB. Write the count for each group. A sorted lot is easier to price, and harder for anyone to argue about.
7. Keep a record
Take a photo of the codes before the deal. If there is a dispute later, the photo settles it. It also lets you check the whole list at once with a gallery scan.
Quick checklist
- Storage chip found (not CPU, RAM or PMIC).
- Main code read in good light.
- GB and type both known.
- No heat, water or crack damage.
- Marking looks original.
- Lot sorted by type and GB.
- Photo of the codes saved.
Check a chip in one scan
ChipGB Scanner does steps 2 and 3 in one scan: it reads the code and shows the GB, company and type. Gallery scan reads a whole photo of codes at once.
Download for AndroidQuestions
Which chip decides the price of a scrap board?
Mostly the storage chip, by its GB and its type. The processor and other parts matter less in most scrap lots.
Can a chip be re-marked to show more GB?
Yes, it happens. Sanded, blurred or odd-looking markings are a warning sign. Compare with a known good chip of the same model.
Is it safe to trust the seller's GB?
Check it yourself. A wrong GB is the most common way buyers and sellers lose money.
This guide is general. Numbering rules differ by family, and some codes are exceptions. Confirm the GB with a verified source before you pay.